Your plant and equipment policy almost certainly has gaps you don’t know about, and claim time is usually where they surface. Standard policies are built around a set of assumptions about where machines work, who operates them, and what they’re worth; and WA operating conditions routinely break every one of those assumptions.
If you’re reading this because a near-miss, a contract renewal, or a competitor’s claim story made you nervous, that instinct is worth acting on. Most operators with mixed fleets are carrying at least one of the five gaps below, and a generic policy won’t warn you about any of them.
None of this points to a bad insurer, the issue is an untailored policy, which comes down to the broker rather than the insurer. Below are the five gaps we see most often on WA sites, each framed as what your policy probably says against what actually happens on the ground.
Want your current plant and equipment cover checked against how you really operate? Book a Risk Blueprint review with Westside.
Gap 1: Unregistered Plant on Remote or Private Land
What your policy probably says: Cover applies to plant used in the ordinary course of your business, with road-registered machines treated one way and mobile plant another.
What actually happens on a WA site: You’re running unregistered plant on a private mine lease, a pastoral station, or fenced remote land with no public road access. Many policies quietly exclude or limit cover for unregistered plant, or treat “off-road, private land” use differently from what you assumed when you bought the cover.
The result is a machine you believed was fully covered sitting inside an exclusion because of where it works and whether it’s registered. On a $500,000 loader, that gap is a serious hit to your business.
Check the definition of “plant,” the registration conditions, and any territorial or land-use wording. If it’s ambiguous, assume it’s not in your favour until someone confirms otherwise in writing.
Also read our guide on Hired-In Plant vs. Owned Equipment and whether you’re covered for both on a WA job site.
Gap 2: Subcontractor vs Employee Liability Treatment
What your policy probably says: Liability cover extends to your employees acting in the course of their duties.
What actually happens on a WA site: Half your seat time is run by subcontractors, labour hire, or owner-operators, not employees. When a subcontractor causes damage or is injured operating your plant, your policy’s response can change completely depending on how it defines “employee,” “worker,” and “operator.”
It’s a common place for the gap between your contract and your policy to open up. Your head contract may hold you responsible for anyone you engage, while your liability cover may only respond for direct employees. That mismatch leaves you legally liable with no policy behind you.
If your fleet is run by a mix of employees and subcontractors — and most WA mixed fleets are — this needs deliberate checking. A generic policy assumes a workforce structure you probably don’t have.
Gap 3: Agreed Value vs Market Value Underinsurance
What your policy probably says: Your plant is insured for its value, listed in the schedule.
What actually happens on a WA site: The schedule says “market value,” and market value at claim time is lower than what it costs you to replace the machine and get it back to a remote site. Or your sums insured were set three years ago and plant prices have climbed since.
Two things bite here:
- Market value settlements pay depreciated value, not replacement cost. The difference can be tens of thousands per machine.
- Underinsurance clauses can reduce a partial-loss payout proportionally if your total sum insured is too low, even on a claim you thought was well within cover.
Agreed value cover removes the argument at claim time. Not every policy offers it, and not every operator has selected it. Review whether your fleet is on agreed or market value, and whether the numbers still reflect current replacement cost plus freight to site.
Not sure whether your fleet is properly valued? Talk to Westside about your plant and equipment cover.
Gap 4: Geographic Limits Outside the Pilbara, Kimberley, and Wheatbelt
What your policy probably says: Cover applies within Australia, or within a defined territorial limit.
What actually happens on a WA site: Your gear moves to a job in the Pilbara, the Kimberley, or out into the Wheatbelt, and the policy’s fine print carries distance-from-base limits, named-location conditions, or transit restrictions you never registered when you signed.
WA is vast, and a policy written with metro or south-west assumptions may not respond the same way once your plant is 1,400 kilometres north on a remote lease. Transit cover, storage away from base, and operation in specific regions can all sit under separate conditions or sub-limits.
If your fleet travels — and in WA civil and mining-services work it almost always does — confirm the geographic wording covers every region you actually operate in, plus the transit between them.
Gap 5: Liability Carve-Outs on Lifting Operations
What your policy probably says: Public and products liability cover applies to your operations.
What actually happens on a WA site: You run cranes, EWPs, or lifting gear, and your liability policy contains a carve-out for damage caused during lifting operations, or for goods being lifted, carried, or handled. This is one of the most common and most expensive exclusions for crane and lifting operators.
A dropped load, a strike during a lift, or damage to the item being lifted can fall squarely into a liability exclusion — exactly the risk you thought you were insuring against. Because lifting is high-consequence work, generic liability wordings often carve it out rather than price for it.
If lifting is part of your operation, your liability cover needs to be read specifically for lifting carve-outs, and any gaps closed with the right extensions or standalone cover.
Why These Gaps Exist (And Why It’s Not the Insurer’s Fault)
A generic plant and equipment policy isn’t defective. It’s built for a typical operator working in ordinary conditions with a conventional workforce. The trouble is that WA civil, mining-services, and lifting operators rarely fit that template, and the policy was never adjusted to suit.
Insurers write to the information they’re given. If a broker didn’t ask where your plant goes, who operates it, what it’s really worth, or whether you lift, the policy simply defaults to assumptions — and those assumptions are where the gaps live.
So the fix isn’t a cheaper premium or a switch of insurer. It’s having your policy read against how you actually operate.
At Westside, we get to know how your operation runs before we look at your policy. We know the difference between road-registered plant and remote unregistered gear, between an employee and an owner-operator, and between a policy that covers lifting and one that carves it out.
Book a Risk Blueprint review with Westside and have your current policy checked against your real fleet, workforce, and regions while you can still act on what it finds.
Frequently Asked Questions
Why would my plant and equipment policy not cover a machine I own?
Usually because of a condition you didn’t register when you bought the cover: unregistered plant on private land, geographic limits, or a definition of “plant” that excludes certain machines. The cover isn’t fake — it’s conditional, and those conditions may not match how you operate.
What’s the difference between agreed value and market value cover?
Agreed value pays a pre-set amount you and the insurer fixed in advance. Market value pays the depreciated value at claim time, which is often lower than replacement cost. For plant that’s expensive to replace and freight to remote sites, agreed value removes the argument.
Does my liability cover extend to subcontractors operating my plant?
Not always. Many policies only respond for direct employees, while your contract may hold you responsible for anyone you engage. If your fleet is run by subcontractors or labour hire, this gap needs to be confirmed and closed deliberately.
Are lifting operations covered under standard liability insurance?
Often not. Many liability wordings carve out damage during lifting operations or to goods being lifted. Crane and EWP operators need their liability cover read specifically for these exclusions, because it’s exactly the risk they most need covered.
My plant works across the Pilbara and Kimberley; is that automatically covered?
Don’t assume so. Policies can carry distance-from-base limits, named-location conditions, or transit restrictions that don’t suit WA distances. If your fleet moves between regions, confirm the geographic and transit wording covers every location you operate in.
How do I find these gaps before I make a claim?
Have a broker read your current policy against your actual operation: where your plant goes, who operates it, what it’s worth, and whether you lift. A policy audit ahead of a claim is the only reliable way to find the gaps while you can still close them.
Make Sure the Policy Actually Fits Your Fleet
Every gap above comes from the same root cause: a policy built on assumptions that don’t match how you run your fleet. The machine, the operator, the value, the region, the lift — if none of those were properly examined, the policy is guessing, and claim time is where you find out.
The fix is a manageable one. Have someone who understands WA plant operations read your cover against your reality and close the gaps while there’s still time.
Get a quote from Westside Insurance Specialists and stop wondering what your policy won’t cover. We’ll tell you plainly, and we’ll fix what’s missing.
Important Information
This communication, including any weblinks or attachments, is for information purposes only. It is not a recommendation or opinion; your personal or individual objectives, financial situation or needs have not been taken into account. This communication is not intended to constitute personal advice.
We strongly recommend that you consider the suitability of this information, in respect of your own personal objectives, financial situation and needs, before acting on it. This document is also not a Product Disclosure Statement (PDS) or a policy wording, nor is it a summary of a particular product’s features or terms of any insurance product. If you are interested in discussing this information or acquiring an insurance product, you should contact your insurance adviser to obtain and carefully consider any relevant PDS or policy wording before deciding whether to purchase any insurance product.


